Roofing dumpster rental in Boulder
Need a roll-off for shingle tear-off in Boulder? We drop, set, and pull the empty container when the crew leaves.
Roofing Tear-off Dumpster Sizing by Squares
How big a roll-off do you actually need for a 25-square tear-off in Boulder? The math is simple: for asphalt shingles, budget two-thirds of a cubic yard per square; a 20-yard low-wall container handles most mid-sized jobs. Tonnage matters for heavy loads; we set the right size to keep your project moving efficiently and within the legal weight limit.
15-Yard Roofing Dumpster
- Capacity: 15 cubic yards
- Fits: 15–20 squares of asphalt shingle
- Best for: Single-layer ranch and bungalow tear-offs
This 10-yard can fits a tight driveway, handling heavy shingle weight in one single haul for your project.
20-Yard Roofing Dumpster
- Capacity: 20 cubic yards
- Fits: 25–30 squares of asphalt shingle
- Best for: Most two-story residential tear-offs
The 20-Yard Container is our roofing workhorse—low side walls let crews ground-throw shingles without needing extra scaffold setup.
30-Yard Roofing Dumpster
- Capacity: 30 cubic yards
- Fits: 35–45 squares of asphalt shingle
- Best for: Multi-layer tear-offs and small commercial roofs
The 30-yard bin keeps big tear-offs moving—no second haul-out needed to avoid tying crews up on tight timelines.
Asphalt Shingle Weight and Tonnage Planning
Most three-tab shingle bundles run about 250 pounds apiece, while architectural laminates tip the scales near 400 pounds per bundle. A 25-square tear-off will push three to five tons onto the driveway before you even add underlayment. That load lands squarely in our 10-Yard Roofing Dumpster’s weight envelope. We set the hooklift truck’s load cap at the container’s limit so every haul stays legal and the streets stay clean on every run.
When you mix shingle debris with framing or sheathing offcuts, we route the container to our general c&d debris service—keeping pure asphalt tear-offs on the standard roofing line. This ensures your site stays efficient, clean, and fully compliant.
Driveway Placement for Roofing Crew Workflow
Our crew in Boulder will angle the Roll-Off so the swing-door faces your eave, allowing ground-throws directly into the bin. We place wooden planks under every roller before the container touches your concrete; this protects the driveway surface. A six-foot tarp perimeter ensures an easy nail sweep after the job. Review our roof tear-off container sizing for your project, then check this asphalt shingle disposal best practices guide to keep your site clean.
Drop angle
Rear door toward the roof line
Set the swing-door end facing the eave where the crew is working to combine walk-in loading and ground-throw paths efficiently.
Surface protection
Wooden planks under every roller
Loaded shingle weight can gouge concrete; driveway boards stay under the rear rollers for the full rental window.
Sweep zone
Six-foot tarp perimeter
Stage magnetic sweepers on the tarp side so nail cleanup runs in parallel with loading your heavy project materials.
Tile, Slate, and Metal Roof Tear-off Containers
Concrete tile, natural slate, and standing-seam metal punish a standard container; they weigh two to four times what asphalt does. For these tear-offs, we route in a 30-yard reinforced low-wall bin: it features a heavier floor plate and ribbed sides. We cap the fill volume well below the visual rim to keep axle weight legal on the lowboy. We also provide a general construction debris service for mixed loads that require more space.
Same-day Pickup for Fast Roof Project Turnover
Tear-offs run tight crews; the roll-off shouldn’t hold them up. Dispatch coordinates same-day haul-out around the crew’s demobilization window so the container frees the driveway for inspection or gutter reinstall; the homeowner sees the space clear before the crew rolls out. Boulder crews route it smooth.